Կարող եմ օգտագործել Vortex հոսքի հաշվիչ RO ջրի հոսքի չափման համար?

Flow measurement of RO water (reverse osmosis water) can be used vortex flowmeter, but need to take into account the characteristics of RO water, vortex flowmeter working principle and practical application scenarios. Հետեւյալը մանրամասն վերլուծություն է:

Characteristics of RO water

RO water is high purity water treated by reverse osmosis and has the following characteristics:

• 1. Low conductivity: RO water has very low conductivity and is almost non-conductive.
• 2. Low viscosity: the viscosity of RO water is similar to that of ordinary water, with good fluidity.
• 3. No impurities: RO water contains almost no particles or suspended matter.
• 4. Chemical stability: RO water is chemically stable, not easy to corrode pipes and instruments.

These characteristics make RO water in the flow measurement of flowmeter requirements are relatively low, because of its stable physical properties, will not cause blockage or corrosion of the flowmeter.

Feasibility of vortex flow meters to measure RO water

Vortex flowmeters can be used to measure the flow of RO water, but the following points need to be noted:

Advantages

• 1. No conductivity requirement: unlike electromagnetic flowmeters, vortex flowmeters do not rely on the conductivity of the medium, making them ideal for measuring RO water with low conductivity.
• 2. High accuracy: vortex flowmeters are able to provide high measurement accuracy within the rated range of the flowmeter.
• 3. No risk of clogging: Since RO water is virtually free of impurities, there is no risk of clogging or wear on the vortex generator of the vortex flowmeter.
• 4. Chemical compatibility: Vortex flowmeters are usually made of stainless steel and have good chemical compatibility with RO water.

Cautions

• 1. Air Bubble Influence: If the RO water contains air bubbles, it may interfere with the measurement accuracy of the vortex flowmeter. Therefore, it is necessary to ensure that there are no air bubbles in the RO water system.
• 2. Low Flow Measurement: The accuracy of the vortex flowmeter may decrease under low flow conditions. If the flow rate of RO water is low, you need to choose a model suitable for low flow measurement.
• 3. Installation conditions: Vortex flowmeter has certain requirements on installation conditions, such as the length of the straight pipe section before and after, matching the diameter of the pipeline, և այլն:, which need to be operated in strict accordance with the installation specifications.

Suggestions for selection

If you choose vortex flowmeter to measure RO water flow, you need to pay attention to the following selection points:

• 1. Flow range: Choose a model that fits the flow range of RO water to ensure that it works within its rated range for optimal accuracy.
• 2. Material: Choose stainless steel or other corrosion-resistant materials to ensure compatibility with RO water.
• 3. Signal output: Select pulse output, 4-20mA output or digital communication interface (օր. HART, Modbus, և այլն:) according to requirements.
• 4. Installation conditions: Ensure that the length of the straight pipe section before and after meets the requirements, and avoid air bubbles and vibration interference.

Vortex flowmeters can be used to measure the flow of RO water, especially in the medium to high flow range, providing high measurement accuracy and reliability. However, under low flow conditions or in the presence of air bubbles, additional measures (օր. installation of a degassing device) may be required to ensure measurement accuracy. If the RO water flow rate is low or the accuracy requirement is very high, ultrasonic flow meters can be considered as an alternative.

In practical applications, it is recommended to select the appropriate vortex flowmeter model according to the specific conditions (e.g., flow range, pipe size, installation conditions, և այլն:) and operate in strict accordance with the installation specifications to ensure optimal performance and long-term stability.