DN100 압축 공기 와류 유량계

The DN100 compressed air vortex flowmeter works based on the Kamen vortex principle, whereby when compressed air flows through a vortex generator in the flowmeter (e.g. a column or a specific geometry), 소용돌이가 양쪽에서 번갈아 발생합니다.. The separation frequency of these vortices is directly proportional to the flow rate through the generator, so by detecting the separation frequency of the vortices, the compressed air flow rate can be calculated.

Instrument caliber: DN100 for compressed air flow measurement in larger pipe diameters.
Measuring medium: Compressed air, nitrogen, oxygen.
Accurate: ±1.0% or ±1.5%.
Range ratio: 1:10, 1:15 or 1:20.
Sensor material: Corrosion-resistant materials such as 304 stainless steel and 316(L) stainless steel.
Output signal: Pulse signals, 4~20mA analog signals, 등. It is easy to connect with various display instruments and control systems.

온라인 채팅 문의하기

DN100 compressed air vortex flowmeter is widely used in various industrial occasions which need to measure compressed air flow, such as pneumatic control system, compressed air supply system, pneumatic tools and equipment. By measuring compressed air flow, precise control and monitoring of pneumatic systems can be realized to improve production efficiency and quality.

Product	DN100 압축 공기 와류 유량계
Model	Meacon-LUGB
Diameter nominal	DN100
Installation	Wafer connection: DN10-DN500(priority PN2.5MPa) Flange connection: DN10-DN80(priority PN2.5MPa);DN100-DN200(priority PN1.6MPa);DN250-DN500(priority PN1.0MPa)
Accuracy	1.5%, 1.0%
Range Ratio	8:1
Medium Temperature	-20°C ~ +150°C, -20°C ~ +260°C, -20°C ~ +320°C, -20°C ~ +420°C
Output signal	4-20mA
Frequency	RS485 communication (Modbus RTU)
Power supply	24VDC±5% Li battery(3.6VDC)
Ingress protection	IP65
Body Materials	Stainless shell
Display	128*64 dot matrix LCD

Product Features

1. No moving parts: stable and reliable structure, no maintenance for long-term operation.
2. High-precision measurement: the output signal is proportional to the flow rate, with no zero drift, ensuring the accuracy and stability of the measurement results.
3. Wide measuring range: Suitable for compressed air measurements in all flow ranges.
4. Low pressure loss: low impact on pipeline pressure, helping to reduce energy consumption.
5. Anti-environmental vibration: Adoption of noise-canceling circuitry and anti-vibration sensing heads makes it suitable for a variety of vibration environments.
6. Low power consumption: low-power single-chip microcomputer technology, long battery life.

Application scenario

DN100 compressed air vortex flow meter is widely used in a variety of occasions where compressed air flow needs to be measured, ~와 같은:

1. Drive pneumatic equipment and control valves in industrial production.
2. Measurement of the flow of gas, 증기 and hot water in energy management (although mainly used for gas measurement, it can also be used for steam measurement in some applications).
3. Measure the flow of various gases in environmental monitoring.

How to select dn100 compressed air vortex flowmeter?

DN100 compressed air vortex flowmeter has many advantages and a wide range of application scenarios, in the selection and use of matters needing attention to ensure its accuracy and stability.

When choosing a DN100 compressed air vortex flowmeter, you need to pay attention to the following points:

1. Confirm the measurement medium: Make sure that the selected instrument is suitable for compressed air measurement.
2. Determine the measurement range: Select the appropriate range ratio and accuracy according to actual needs.
3. Consider the use conditions: including medium temperature, ambient temperature, pressure, etc., to ensure that the selected instrument can meet the use requirements.
4. Choose a reliable brand: choose a well-known brand and manufacturer to ensure the quality and after-sales service of the meter.

When choosing DN100 compressed air vortex flowmeter, you need to consider the characteristics of the measuring medium (such as temperature, pressure, density, etc.), measuring range, accuracy requirements, the use of the environment and the installation conditions and other factors. At the same time, you also need to choose a reliable manufacturer and brand to ensure the quality of the meter and after-sales service.